Lobby A and B

Opportunity Details 

• A = 35.25” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall B lobby

Full size of top section of door is 35.25” wide x 50.25” high.

Opportunity Details 

• A = 22.5” diameter (qty 10)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall B lobby

NOTE: only the left (2) doors provide access to the Hall B lobby

Opportunity Details 

• A = 400” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 51.125” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to top of facility ottomans
• Located on level one in the Hall A lobby

NOTE: confirm with your event manager that these are in this location and available

Opportunity Details 

• A = 400” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 298.75” wide x 114” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall A lobby

NOTE: There are two outlets on the lower right side of cling that will need to be cut out or covered.