Opportunity Details 

• A = 210” wide x 194” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one near the entrance to Hall D

Opportunity Details 

• A = 402” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance to Hall D

Opportunity Details 

• A = 44’ wide x 5’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one above the entrance to Hall D

Opportunity Details 

• A = 40’ wide x 5’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one between the entrances to Hall D

NOTE: placement is centered between two columns.  Full length of available rigging is 88’ long (height of 5’ would be required due to security camera as shown)

Opportunity Details 

• A = 39’ wide x 6’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one between the entrances to Hall D

NOTE: placement is centered between two columns.  Full length of available rigging is 88’ long (height of 5’ would be required due to security camera as shown in the 2nd image)

Opportunity Details 

• A = 402” wide x 94” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall D

Opportunity Details 

• A = 18’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 199” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall C

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 155” wide x 113.5” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 295” wide x 114” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall D lobby

NOTE: There are numerous outlets as shown that will need to be cut out or covered.

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall D

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 22.5” diameter (qty 10)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall D lobby

NOTE: only the right (6) doors provide access to the Hall D lobby

Opportunity Details 

• A = 22.5” diameter (qty 6)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall D lobby

NOTE: only the left (2) doors provide access to the Hall D lobby

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall D lobby

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall D lobby

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall D lobby

Opportunity Details 

• A = 36.5” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall D lobby

Full size of top section of door is 36.5” wide x 50.25” high.

Opportunity Details 

• A = 36.5” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall D lobby

Full size of top section of door is 36.5” wide x 50.25” high.

Opportunity Details 

• A = 708” long x 11.5” wide (qty 1)
• B = 714” long x 11.5” wide (qty 1)
• Single-sided vinyl banner
• No pockets
• Placed between escalators
• Located on level one in the Hall D lobby up to level two

Opportunity Details 

• A = 24” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to facility structure
• Located on level one in front of escalator in the Hall D lobby up to level two

Opportunity Details 

• A = 48.375” wide x 34.75” high (qty 2)
• B = 48.25” wide x 34.75” high (qty 2)
• Single sided graphic
• Phototex / window cling
• Applied to glass below railing
• Located on level one in the Hall D lobby

Opportunity Details 

• A = 76.75” wide x 76.5” high (qty 2)
• B = 76.75” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located inside the entrance doors in the Hall D lobby at the bottom of the escalators up to level two

Opportunity Details 

• A = 11” diameter (qty 4)
• B = 22.5” diameter (qty 6)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall E lobby

NOTE: only doors with graphic B provide access to the Hall E lobby

Opportunity Details 

• A = 76.5” wide x 78.5” high (qty 2)
• B = 76.5” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall E lobby

Opportunity Details 

• A = 76.5” wide x 78.5” high (qty 2)
• B = 76.5” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall E lobby

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall E lobby

Opportunity Details 

• A = 36.5” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall E lobby

Full size of top section of door is 35.125” wide x 50.25” high.

Opportunity Details 

• A = 36.5” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall E lobby

Full size of top section of door is 35.125” wide x 50.25” high.

Opportunity Details 

• A = 22.5” diameter (qty 2)
• B = 11” diameter (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall E lobby

NOTE: only doors with graphic A provide access to the Hall E lobby

Opportunity Details 

• A = 113.25” wide x 208” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one in the Hall E lobby

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 40.5” wide x 197” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one in the Hall E lobby

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall E lobby

Opportunity Details 

• A = 690” long x 11” wide (qty 1)
• B = 604” long x 17” wide (qty 1)
• C = 692” long x 11” wide (qty 1)
• Single-sided vinyl banner
• No pockets
• Placed between escalators
• Located on level one in the Hall E lobby up to level two

Opportunity Details 

• A = 24” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to facility structure
• Located on level one in front of escalator in the Hall E lobby up to level two

Opportunity Details 

• A = 20.5” wide x 83” high (qty 4)
• Single-sided graphic
• Phototex / PSV
• Applied to elevator doors
• Located on level one in the Hall E lobby

Opportunity Details 

• A = 101” wide x 113” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall E lobby

Opportunity Details 

• A = 76” wide x 197” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one in the Hall E lobby

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located inside the entrance doors in the Hall E lobby at the bottom of the escalators up to level two

Opportunity Details 

• A = 76” wide x 200” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall E

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall E

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall E

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall E

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 200” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall E

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 36’ wide x 6’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one above the entrance to Hall E

Opportunity Details 

• A = 27’ wide x 5’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one above the entrance to Hall E