Opportunity Details 

• A = 22.5” diameter (qty 6)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall A lobby

Opportunity Details 

• A = 76.5” wide x 78.5” high (qty 2)
• B = 76.5” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall A lobby

Opportunity Details 

• A = 76.5” wide x 78.5” high (qty 2)
• B = 76.5” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall A lobby

Opportunity Details 

• A = 76.5” wide x 78.5” high (qty 2)
• B = 76.5” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall A lobby

Opportunity Details 

• A = 35.25” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 3, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall A lobby

Full size of top section of glass is 35.25” wide x 50.25” high.

Opportunity Details 

• A = 35.25” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 3, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall A lobby

Full size of top section of glass is 35.25” wide x 50.25” high.

Opportunity Details 

• A = 22.5” diameter (qty 2)
• B = 11” diameter (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall A lobby

NOTE: only doors with graphic A provide access to the Hall A lobby

Opportunity Details 

• A = 298.75” wide x 114” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall A lobby

NOTE: There are two outlets on the lower right side of cling that will need to be cut out or covered.

Opportunity Details 

• A = 40.5” wide x 198” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one across from the entrance to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 24” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to facility structure
• Located on level one in front of escalator in the Hall A lobby up to level 2

Opportunity Details 

• A = 690” long x 11.25” wide (qty 2, left and right)
• B = 604” long x 18” wide (qty 1, center)
• Single-sided vinyl banner
• No pockets
• Placed between escalators
• Located on level one in the Hall A lobby up to level two

Opportunity Details 

• A = 40.5” wide x 198” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one across from the entrance to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 51.125” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to top of facility ottomans
• Located on level one in the Hall A lobby

NOTE: confirm with your event manager that these are in this location and available

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level 1 between Hall A lobby and Hall B lobby

Opportunity Details 

• A = 76” wide x 201” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance doors to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 124” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance doors to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 201” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall A

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 400” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 20’ wide x 6’ high
• Single sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 44’ wide x 6’ high
• Single sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 400” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall A

Opportunity Details 

• A = 356” wide x 94” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall B

Opportunity Details 

• A = 34’ wide x 6’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one between the entrances to Hall B

NOTE: placement is centered between two columns.  Full length of available rigging is 77’ long (height of 5’ would be required due to security camera as shown in the 2nd image)

Opportunity Details 

• A = 30’ wide x 5’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one between the entrances to Hall B

NOTE: placement is centered between two columns.  Full length of available rigging is 77’ long.

Opportunity Details 

• Option A = 33’ wide x 6’ high
• Option B = 44’ wide x 5’ high
• Single-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one near the entrance to Hall B

Opportunity Details 

• A = 402” wide x 89” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one above the entrance doors to Hall B

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall B lobby

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 114” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 76” wide x 209” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one near the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 14’ wide x 5’ high (recommended size)
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall B lobby

NOTE: Maximum width is 20’.  Recommended size of 14’ wide due to visibility behind Saltgrass Steak House sign as shown.

Opportunity Details 

• A = 22.5” diameter (qty 10)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall B lobby

NOTE: the right (6) doors provide access to the Hall B lobby

Opportunity Details 

• A = 20’ wide x 5’ high
• Double-sided banner
• 4” pockets top and bottom
• Mounted on interior hang points
• Located on level one in the Hall B lobby

Opportunity Details 

• A = 47.5” wide x 35” wide (qty 1)
• B = 48.25” wide x 35” high (qty 1)
• C = 48.5” wide x 35” high (qty 1)
• D = 48.375” wide x 35” high (qty 1)
• Single sided graphic
• Phototex / window cling
• Applied to glass below railing
• Located on level one in the Hall B lobby

Opportunity Details 

• A = 715” long x 11.5” wide (qty 2)
• Single-sided vinyl banner
• No pockets
• Placed between escalators
• Located on level one in the Hall B lobby up to level two

Opportunity Details 

• A = 24” Diameter (qty 2)
• Single sided graphic
• Phototex / PSV
• Applied to facility structure
• Located on level one in front of escalator in the Hall B lobby up to level two

Opportunity Details 

• A = 75.25” wide x 77” high (qty 2)
• B = 75.25” wide x 22.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located inside the entrance doors in the Hall A lobby at the bottom of the escalators up to level two

Opportunity Details 

• A = 151” wide x 113.5” high
• Single sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall B lobby

Opportunity Details 

• A = 295” wide x 113.5” high
• Single-sided graphic
• Phototex / PSV
• Applied to facility wall
• Located on level one in the Hall B lobby

NOTE: There are two outlets on the lower right side of cling that will need to be cut out or covered.

Opportunity Details 

• A = 76” wide x 197” high
• Single sided graphic
• Fabric banner with zipper closure
• Wrapped around facility column
• Located on level one across from the entrance to Hall B

NOTE: To use vinyl banner instead of fabric, add 2” for overlap and Velcro closure. 

Opportunity Details 

• A = 35.25” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall B lobby

Full size of top section of door is 35.25” wide x 50.25” high.

Opportunity Details 

• A = 35.25” wide x 14.75” high (qty 4)
• B = 24” wide x 36” high (qty 4, recommended size)
• C = 39” wide x 17.5” high (qty 4)
• Single sided graphic
• Perforated window cling
• Applied to facility windows and doors
• Located outside on the entry doors to the Hall B lobby

Full size of top section of door is 35.25” wide x 50.25” high.

Opportunity Details 

• A = 22.5” diameter (qty 10)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located on the outside of the entrance doors to the Hall B lobby

NOTE: only the left (2) doors provide access to the Hall B lobby

Opportunity Details 

• A = 78.25” wide x 78” high (qty 2)
• B = 78.25” wide x 21.75” high (qty 2)
• Single sided graphic
• Perforated window cling
• Applied to facility windows
• Located to the left of the entry doors to the Hall D lobby